| |
design within 24 hours, 2 years warranty for crane parts-HYCRANE |
Easy Maintenance High Efficiency Overhead Ladle Cranes
Ladle cranes are designed to be operated efficiently, uninterruptedly and safely in continuous use.The design conforms to the requirements of international standards.
Because of a higher risk level, special safety features are designed for the ladle cranes that transport molten metal. The main hoist mechanism includes four independent rope reevings, double service brakes on primary shafts, and backup brake acting on the rope drum. Rope equalizer beams are provided with a dampening unit to slow down equalizer beam tilting in case of wire rope failure. An upper emergency stop limit switch is also used in the main hoist. In addition to this overload protection, the ‘emergency stop’ system bypassed from PLC, derailment supports, main hoist overspeed supervision, and end limit switches are automatically standard features of the equipment.
1.Product Pictures
Hycrane-One you need,All we support.
2.Product Details
Hycrane-One you need,All we support.
Metallurgy cranes also manufactured in our company, you can learn more by following information.
Overhead foundry cranes with hook
bridge foundry cranes with hook mainly consists of main beam, hook trolley, crane traveling mechanism, cabin and electric controlling system, etc. Foundry crane is one of the main equipment in the continuous casting technology of steel making. It is mainly used transfer the pouring melted iron to the appointed place, and the thermal-protective coating is added at the bottom of the main girder. The place where molten nonmetal material and red-hot solid metal is lifted. The casting overhead crane are heavy duty for 20-24hours working.
Following features for the Foundry Double Girder Overhead Crane:
Heavy Duty and High Efficient
Long Life Span: 30-50years.
Easy for Installation and maintenance.
High Temperature
Full Spare Parts will offer
Dual Lift Motor for Main Lifting Mechanism
| Technical table |
| Item |
Data |
| Capacity |
3-74t |
| Span |
6-40m |
| Lifting height |
3-60m |
| lifting speed |
0.1-13m/min |
| cross travelling speed |
2-50m/min |
| long travelling speed |
2-100m/mim |
| Working class |
ISOA6-A7/FEM3M-FEM4M |
| Power source |
as your demands |
| Other |
According to your specific usage, specific model and design will offer |
In order to make a very quick offer and saving your waiting time, It's better to fill the information below. Copy and send us the information together with the enquiry.
| Load Capacity, ton: |
(_______) |
| Span, S, m: |
(_______) |
| Lift Height, H, m: |
(_______) |
| Voltage: |
(_______) |
| Duty Class: |
(_______) |
| ? Hours per day: |
(_______) |
| Control way: |
(_______) |
| Lift Speed: |
(_______) |
| Cross & Long travel speed: |
(_______) |
| Rail supply needed |
(_______) |
| Power supply system needed |
(_______) |
| Your nearest port: |
(_______) |
|
{Tips: 5 ton, 10 ton, 16 ton, 20 ton, 30 ton, 40 ton, 50 ton up to 550 ton} |
| {Tips: 6m ~40m} |
| |
| {Tips: 380V, 50Hz, AC, 3-phase or please note} |
| {Tips: A5, A3, If you don't know, please fill the follow} |
| |
| {Tips: Remote control, cabin control or pendent control } |
| {Tips: Single speed, double speed, or stepless speed} |
| {Tips: Single speed or stepless speed} |
| {Tips: If yes, please note the Long travel length} |
| {Tips: If yes, please note the Long travel length} |
| {Tips: We quote CIF price need the port. FOB price please note FOB} |
If your workshop roof is very low, Its better to send us a drawing, a sketch or show us datas and then our Engineer can work out a full suitable solution just for yours.
Looking forward your kindly inquiry and hope to help your strong business in near future!
